The Nook Simple Touch is a popular e-reader known for its long battery life and ease of use. However, like all electronic devices, its battery will eventually need to be replaced. If you’re experiencing a dead or dying battery, don’t worry – changing it is a relatively simple process that can be done at home with a few basic tools. In this article, we’ll walk you through the steps to replace the battery in your Nook Simple Touch.
Before You Start: Preparing for the Battery Replacement
Before you begin, make sure you have the following:
- A replacement battery specifically designed for the Nook Simple Touch (available from online retailers or Barnes & Noble’s website)
- A plastic spudger or similar tool for prying open the device
- A small screwdriver (preferably a Phillips head)
- A soft cloth or anti-static wrist strap to prevent damage to the device’s internal components
It’s also a good idea to back up your Nook’s content and settings before starting the replacement process. This will ensure that you don’t lose any important data in case something goes wrong.
Understanding the Nook Simple Touch’s Battery
The Nook Simple Touch uses a rechargeable lithium-ion battery, which is designed to provide long battery life and efficient charging. The battery is located inside the device, and accessing it requires removing the back cover and some internal components.
Battery Specifications
- Type: Rechargeable lithium-ion battery
- Capacity: 1530mAh
- Voltage: 3.7V
- Dimensions: 103mm x 63mm x 4.5mm
Step 1: Removing the Back Cover
To access the battery, you’ll need to remove the back cover of your Nook Simple Touch. This is the most challenging part of the process, as the cover is held in place by several clips and adhesive strips.
- Start by locating the small notch at the top of the device, just above the power button. This is the weakest point of the cover, and where you’ll begin prying it open.
- Insert your plastic spudger into the notch and gently pry the cover away from the device. Work your way around the edges, using a combination of prying and twisting motions to release the clips and adhesive strips.
- Once the cover is removed, set it aside carefully, taking note of the location of the clips and adhesive strips for reassembly later.
Step 2: Disconnecting the Battery Connector
With the back cover removed, you’ll see the battery and its connector. The connector is held in place by a small piece of tape and a clip.
- Use your spudger to carefully remove the tape and release the clip.
- Gently lift the connector away from the battery, taking care not to damage the wires or the connector itself.
Important Safety Note
When handling the battery and its connector, be careful not to touch any of the internal components or wires. This can cause damage to the device or even a short circuit.
Step 3: Removing the Battery
Now that the connector is disconnected, you can remove the battery from the device.
- Use your spudger to carefully pry the battery away from the adhesive strips that hold it in place.
- Once the battery is free, lift it out of the device and set it aside.
Step 4: Installing the New Battery
To install the new battery, simply reverse the steps above.
- Place the new battery in the device, making sure it’s securely seated and the adhesive strips are holding it in place.
- Reconnect the battery connector, making sure it’s securely attached to the battery and the device.
Important Note
When installing the new battery, make sure it’s properly seated and the adhesive strips are holding it in place. If the battery is not properly secured, it can cause damage to the device or even a short circuit.
Step 5: Reassembling the Device
Now that the new battery is installed, you can reassemble the device.
- Start by replacing the back cover, making sure it’s securely attached to the device using the clips and adhesive strips.
- Use your spudger to ensure the cover is properly seated and the edges are aligned.
Step 6: Charging the New Battery
Once the device is reassembled, plug it in and charge the new battery.
- Make sure the device is turned off before charging.
- Use the original charger and cable to charge the device.
- Allow the device to charge for at least 30 minutes before turning it on.
Troubleshooting Tips
If you encounter any issues during the replacement process, here are some troubleshooting tips:
- If the device doesn’t turn on after replacing the battery, try charging it for a longer period or checking the battery connector for damage.
- If the device is not recognizing the new battery, try resetting the device or checking the battery’s specifications to ensure it’s compatible.
Conclusion
Replacing the battery in your Nook Simple Touch is a relatively simple process that can be done at home with a few basic tools. By following the steps outlined in this article, you can revive your device and enjoy reading again. Remember to handle the internal components with care, and take your time when reassembling the device. If you’re not comfortable with the replacement process, consider consulting a professional or contacting Barnes & Noble’s customer support for assistance.
| Tool | Description |
|---|---|
| Plastic spudger | A small, flat tool used for prying open the device and removing the back cover. |
| Small screwdriver (Phillips head) | A small screwdriver used for removing screws and other small components. |
| Soft cloth or anti-static wrist strap | A soft cloth or anti-static wrist strap used to prevent damage to the device’s internal components. |
By following the steps outlined in this article, you can replace the battery in your Nook Simple Touch and enjoy reading again. Remember to handle the internal components with care, and take your time when reassembling the device.
What tools do I need to change the battery of my Nook Simple Touch?
To change the battery of your Nook Simple Touch, you will need a few basic tools. These include a plastic spudger, a Phillips screwdriver, and a replacement battery that is compatible with your device. It’s also recommended to have a soft cloth or anti-static wrist strap to prevent damage to the internal components of your Nook.
Make sure to purchase a replacement battery that is specifically designed for the Nook Simple Touch, as other batteries may not fit or function properly. You can find these tools and the replacement battery at most electronics stores or online retailers. Before starting the replacement process, ensure that you have all the necessary tools and materials to avoid any delays or complications.
How do I prepare my Nook Simple Touch for battery replacement?
Before starting the battery replacement process, it’s essential to prepare your Nook Simple Touch. Begin by turning off your device and unplugging it from any power source. Remove any accessories, such as the cover or screen protector, to prevent them from getting in the way of the replacement process.
Next, locate the screws on the back of your Nook Simple Touch. You will need to remove these screws to access the internal components of your device. Make sure to set the screws aside in a safe place where they won’t get lost. Once you have prepared your Nook, you can proceed with the battery replacement process.
How do I remove the back cover of my Nook Simple Touch?
To remove the back cover of your Nook Simple Touch, you will need to use a plastic spudger. Insert the spudger into the gap between the back cover and the device, and gently pry the cover away from the Nook. Work your way around the edges of the device, using the spudger to release the clips that hold the cover in place.
As you remove the back cover, be careful not to damage any of the internal components of your Nook. The cover is fragile and may break if it is flexed too much. If you encounter any resistance, do not force the cover off, as this may cause damage to the device. Instead, try to locate the source of the resistance and gently work around it.
How do I disconnect the battery from the motherboard?
To disconnect the battery from the motherboard, you will need to locate the battery connector. This connector is usually a small plastic clip that holds the battery cable in place. Use a plastic spudger to gently pry the connector away from the motherboard.
Once the connector is released, you can carefully lift the battery cable away from the motherboard. Be careful not to touch any of the internal components of your Nook, as this may cause damage to the device. If you encounter any resistance, do not force the cable away from the motherboard, as this may cause damage to the device.
How do I remove the old battery from my Nook Simple Touch?
To remove the old battery from your Nook Simple Touch, you will need to use a plastic spudger. Insert the spudger into the gap between the battery and the device, and gently pry the battery away from the Nook. Work your way around the edges of the battery, using the spudger to release the adhesive that holds it in place.
As you remove the old battery, be careful not to damage any of the internal components of your Nook. The battery is fragile and may break if it is flexed too much. If you encounter any resistance, do not force the battery away from the device, as this may cause damage to the Nook. Instead, try to locate the source of the resistance and gently work around it.
How do I install the new battery in my Nook Simple Touch?
To install the new battery in your Nook Simple Touch, you will need to align it with the adhesive strips on the device. Gently press the battery into place, making sure that it is securely attached to the Nook. Use a soft cloth to wipe away any excess adhesive that may have squeezed out during the installation process.
Once the new battery is installed, you can reconnect the battery cable to the motherboard. Make sure that the connector is securely attached to the motherboard, and that the cable is not pinched or damaged. If you encounter any resistance, do not force the connector onto the motherboard, as this may cause damage to the device.
How do I reassemble my Nook Simple Touch after replacing the battery?
To reassemble your Nook Simple Touch after replacing the battery, you will need to reverse the steps that you followed to disassemble the device. Begin by replacing the back cover, making sure that it is securely attached to the Nook with the screws. Tighten the screws firmly, but do not overtighten them, as this may damage the device.
Next, replace any accessories that you removed, such as the cover or screen protector. Turn on your Nook Simple Touch and test it to make sure that it is functioning properly. If you encounter any issues, you may need to recheck the connections or seek further assistance.